Test and Failure Analysis

Surface topography analysis
Location：首页 > Services > Test and Failure Analysis > Surface topography analysis

3D Optical Microscope

Equipment model：DVM6
Focusing on various energy storage business needs, TIES strives to develop into a comprehensive, market-oriented R&D enterprise that integrates testing analysis, failure analysis, qualification certification, technology development, engineering amplification, intelligent manufacturing, high-value information services, and high-end training. Contact us

Technical Parameters

  1. Eyepiece: Field number 22mm, 10x magnification, with diopter correction.

  2. Objective Lens: 6-position or 7-position electric objective turret, designed for 32mm diameter industrial objectives.

  3. Condenser: Apochromatic optical path.

  4. Focusing System: 2-gear high-precision electric focusing drive.


Application Range

Imaging of morphology and microstructures.
Prev：Field Emission Transmission Electron Microscope (FETEM)
Next：Atomic Force Microscope (AFM)

Related Recommendations

Scanning Electron Microscope (SEM)
Technical ParametersSecondary Electron Resolution: 0.8 nm (acceleration voltage 15 kV) (standard mode, not in any deceleration mode)1.1 nm (acceleration voltage 1 kV) (deceleration mode)Magnification: 20 to 1000k Acceleration Voltage: 20-1000kElectronic Displacement: ±12μm (WD=8mm)Aperture: 4-hole objective movable aperture system: built-in self-cleaning device (aperture 30, 50, 50, 100μm)Detectors: Lower and Upper secondary electron detectors, Upper filtered backscatter detectorSignal Selection: Secondary electron image, Backscattered electron image, Mixed imageRapid Sample Exchange System: 100mm diameter large sample exchange chamber, sample exchange time is 30 secondsVacuum Transfer System: Hitachi original vacuum transfer systemEnergy Spectrometer: Bruker 60mm2 energy spectrometerApplication RangeThe deceleration function of acceleration voltage has a series of advantages such as shorter wavelength, smaller aberrations, and higher resolution. It can reduce sample damage while obtaining low-voltage high-resolution images.The SE/BSE signal reception function in proportion. The electron microscope is equipped with Lower and Upper secondary electron detectors, and a Upper filtered backscatter probe. By changing the voltage of the internal transformer electrode of the lens, the detector can capture secondary electrons and backscattered electrons, mix them in any proportion (100 levels), achieve optimal contrast observation, suppress charge and edge effects, and obtain the best contrast SEM image.

Detail
X-ray Photoelectron Spectroscopy (XPS)
Technical ParametersEnergy Resolution: FWHM of Ag3d5/2 peak < 0.48eV; FWHM of O=C-O peak in C1s spectrum < 0.82eVMinimum x-ray Beam Spot Size: <10.0μm (x-axis); <10.0μm (y-axis)Maximum Beam Current of Ar Ion Sputter Gun: >5.0μA @5kVDifferential Pressure of Ar Ion/C60 Ion Sputter Gun: < 6.7x10-6 Pa (5x10-8Torr)Maximum Current of Ar Gas Cluster Ion Gun: >40nA @ 20kVMinimum Beam Spot Size of Ar Gas Cluster Ion: 500 μm @ 20 kVThermal Performance of Sample Stage: -140°C to 800°CApplication RangeInorganic compounds, alloys, polymers, energy batteries, surface defects (corrosion, foreign substances, contamination, uneven distribution, etc.), surface multilayer films, etc.

Detail
Friendly link： Institute of Physics, Chinese Academy of Sciences (IOP, CAS) Yangtze River Delta Physics Research Center Co., Ltd. Liyang Deepwater Sci. Tech. Consulting Ltd. Company

CopyRight © 2024 Tianmu Lake Institute of Advanced Energy Storage Technologies All Rights Reserved. 苏ICP备18030956号-1