Process Engineering

Cylinder battery assembly business
Location：首页 > Services > Process Engineering > Cylinder battery assembly business

Welding base machine / Base welding machine

Type of equipment：Cylinder battery assembly business
Focusing on various energy storage business needs, TIES strives to develop into a comprehensive, market-oriented R&D enterprise that integrates testing analysis, failure analysis, qualification certification, technology development, engineering amplification, intelligent manufacturing, high-value information services, and high-end training. Contact us

Process Environment

Dew Point: -50℃

Dust: 100,000-grade


Equipment Capability Parameters

  1. Welding pin specifications: Diameter * Length = 31002, Diameter * Length = 2.51002.

  2. Number of welding spots: 1 spot (single or double welding).

  3. Welding base tensile force: Self-settable (adjusted by precision pressure regulating valve), capable of welding three layers of 0.1mm nickel strip with a tensile force of 20-30N without falling off, and the welding base tensile force can be automatically detected.

  4. Equipment capacity: 30pcs/min.
Prev：Winding machine / Coiling machine
Next：Roll groove machine / Groove rolling machine

Related Recommendations

Positive and negative electrode sheet making machine
Process EnvironmentDew Point: -50℃Dust: 100,000-gradeEquipment Capability ParametersTab tape position accuracy: ±0.5mm;Tab length accuracy: ±0.5mm;Tab welding position error: ±0.5mm;Tab welding deflection: ±1°;Tab exposure accuracy: (7~20) ≤±0.5mm;Tab welding tensile force: ≥10N (in-line tension);Burr of electrode and tab cutting: Electrode ≤0.010mm, tab ≤0.025mm;Range of misplaced tape application: 6~20mm, misplaced tape application accuracy: ≤±0.5mm;Range of adhesive tape exposure beyond the electrode: 0.1-0.5mm.Production speed: For an electrode of 800mm in length and 58mm in width with one tab welded, the production cycle time is approximately 28-30PCS/min (with one adhesive tape application).

Detail
Winding machine / Coiling machine
Process EnvironmentDew Point: -50℃Dust: 100,000-gradeEquipment Capability ParametersWorking tension of positive and negative electrodes: 10~20N, servo control, manually set;Working tension of separator: 8~15N, servo control, manually set;Alignment of positive and negative electrodes: ≦±0.3mm;Alignment of separator: ≦±0.5mm;Burr on the cut edge of the electrode: ≤10µm;Production speed: 24-28PCS/min.

Detail
Friendly link： Institute of Physics, Chinese Academy of Sciences (IOP, CAS) Yangtze River Delta Physics Research Center Co., Ltd. Liyang Deepwater Sci. Tech. Consulting Ltd. Company

CopyRight © 2024 Tianmu Lake Institute of Advanced Energy Storage Technologies All Rights Reserved. 苏ICP备18030956号-1