Technical Parameters
Test Range: 0.02-2600μm (Wet Method) / 0.1 - 2600μm (Dry Method)
Repeatability Error: ≤ 0.5% (National Standard Sample D50, Wet Method)
Accuracy Error: ≤ 0.5% (National Standard Sample D50, Wet Method)
Bimodal Resolution: ≥ 1.65 (Ratio of Two Standard Sample Nominal Values)
Measurement Mode: Fully Automatic Measurement (SOP)
Fastest Measurement Speed: ≤ 10 Seconds
Laser Source: Imported Fiber Laser
Alignment Method: Automatic Alignment
Optical System: Forward and Reverse Fourier, Tilted Sample Cell
Detection Angle: 0.016-165°
Operating System: WinXP/ Win7/ Win8/Win10
Interface Type: USB 2.0 or 3.0
Photodetectors: 92 (72 Forward, 14 Side, 6 Backward)
Ultrasonic Power: 50W
Circulating Cell Volume: 600ml
Circulating Flow Rate: 3000 - 8000ml / Minute
Dispersing Medium: Compressed Air or Inert Gas
Pressure: 0.1-0.8MPa Continuously Adjustable
Gas Flow Rate: 400 - 6000L / Min
Sample Quantity: 0.2g - 1g
Voltage: AC220V, 50/60Hz
Application Range
Lithium battery materials, catalysts, phosphors, cement, abrasives, pharmaceuticals, pesticides, food, coatings, dyes, ceramic raw materials, chemical materials, nanomaterials, paper fillers and coatings, various emulsions, etc.
Detail
Detail
