Equipment Introduction |
||||
NO |
Name |
Picture |
Environment |
Equipment Capability Paramete |
1 |
Mixer |
|
Cathode dew-point: - 40℃; Anode dew-point: - 50℃; Dust Control: Class 100,000 |
1. Available volume: 5L/35L. 2. Mixing speed: 0-54rpm. 3. High-speed dispersion: 0-4400 rpm. 4. Automatic vacuum control (vacuum pressure holding:≧ -0.08Mpa for 2 hours). 5. Temperature control: 0-90℃. |
2 |
Coating Machine |
|
Cathode dew-point: - 40℃; Anode dew-point: - 50℃; Dust Control: Class 100,000 |
1. Extrusion coating: the maximum width of coating is 300mm, the thickness of aluminum foil is12-30 um, the thickness of copper foil is 6-30um. 2. Coating speed: 1m/min-3m/min. 3. Coating accuracy: ±1% (related to slurry rheological property). 4. Length of the oven: 6 meters. 5. Drying temperature: RT-120℃. |
3 |
Rolling Machine |
|
Cathode dew-point: - 40℃; Anode dew-point: - 50℃; Dust Control: Class 100,000 |
1. Rolling speed: 0-5m/min. 2. Removing cathode fold. 3. Uniformity of roll thickness: ≤±0.002mm. 4. Maximum pressure between two rollers: 2000KN, precision of pressure regulator: ±1%. 5. Roller size: φ400mm×450mm, diameter of each hydraulic cylinder: φ220mm. |
4 |
Slitting Machine |
|
Cathode dew-point: - 40℃; Anode dew-point: - 50℃; Dust Control: Class 100,000 |
1. Precision of cutting width: ≤±0.1mm. 2. Cutting width: 32mm-500mm. 3. Cutting speed: 0-40m/min. 4. Metal burr: ≤10um. |
5 |
Tab Forming Machine |
|
Cathode dew-point: - 40℃; Anode dew-point: - 50℃; Dust Control: Class 100,000 |
1. Cutting accuracy of tab space: stacking process: ≤±0.25mm; winding process: ≤±0.3mm. 2. Laser cutting burr: MD≤10μm, TD ≤25μm. 3. Laser cutting speed: 0-20m/min. 4. Length of plate: 75-290mm, width of tab: 30-120mm, length of tab: 10-20mm. 5. Width of incoming plate: 75~310mm (including the blank part). |
6 |
Plates Cutting Machine |
|
Dew-point: - 50℃; Dust Control: Class 100,000 |
1. Cutting burr: MD≤10μm. 2. Cutting speed: 2-3s/piece. 3. Length of plate: 75 ~ 310mm (including tab). |